User Manual

20 VEGACOM 557 Siemens

Setup

Select with F7 in the field program name the program library COMLIB02. Push F4 to select the

procedure:

-> PROGRAM CHOICE -> CHOICE-> TRANSMIT –> SIMATIC S5 / COM 525

P R O C E D U R E

—————————————————————————————————————

Source: Destination:

VOLUME: FD FD

DRIVE: C C

INTERFACE NO.:

PROGRAM NAME: COMLIB02 PROGR1

COMPONENT: RK

Source: COMPONENT NAME VERSION

RK P3964R 01

F1 | F2 | F3 | F4 | F5 | F6 | F7 | F8

TRANS- | | |||||

MIT||||||HELP | EXIT

Select with F7 in the field component the procedure 3964 R and transfer with F1 to the own file

(here PROGR1 ).

Procedure transmission parameter.

Change to the parameter menu: Basic pattern F1 -> Choice F2 -> F6 Continue F2 Procedure

parameter. The character length must be set to 8, the number of stop bits to 1 and the parity to

EVEN.

Interpreter

The interpreter component can be taken over from the program library COMLIB02 to load the

interpreter RK512. Change to the transmission menu: Basic pattern F1 -> Choice F2 -> Trans-

fer F5 -> FD-FD. The menu appears:

-> PROGRAM CHOICE -> CHOICE-> SIMATIC S5 / COM 525

T R A N S M I T