Manual

VEGACOM 557 Profibus FMS 23
Setup
Basis-SSNR:
- The basic interface number is required exclusively for SIMATIC components. Sectors of 4
interfaces are always reserved (adjustment range: 0, 4, 8 … 254)
Number of interf.:
- This parameter indicates how many interfaces (tiles) are accessed (adjustment range:
1 … 4)
Module size:
- Information on the storage capacity of the storage module.
In addition, the generation date and the system identification can be saved.
SINEC-NCM (ENDE)
Edit - CP Init basic initialisation Source: C:QMESSW
————————————————————————————————————————
Bootstrap data: SIMATIC sepcifi. :
L2 - address : 13 Basis-SSNR : 0
Active / Passive : ACTIVE Number of interf. : 1
Network data file : MESSWNCM.NET
Informative parameter :
Module kind : EPROM Module size : 16 KB
Comp. identificat. : CP5431
Firmware-version :
File date : 15.12.95
System identific. : VEGACOM 557 PROFIBUS
FFFFFFF F HELP
1234567 TAKE OVER 8 CHOICE
3. Menu: Edit –> Network parameter global / local
A difference is made between network parameters local and global. In the global network
parameter mask, bus parameters for all participants of a network can be defined. These bus
parameters can be entered in all databases belonging to the network with Network –> Net-
work adjustment. The local network parameter mask enables a participant-specific editing of
the bus parameters. It must be noted that the baud rates set here are also set on the
PROFIBUS-Gateway VEGACOM 557.