Manual

Release Note
Document: RN_TH LINK PROFIBUS_6.1.0.0_en Date: 09-Aug-2012 Page 3 of 8
6. Compatibility
The TH LINK is compatible with
• TH SCOPE* release 1.1.0.0
• PROFIBUS Scope* release 4.2
• TH OPC Server DP release 2.0
• CommDTM PROFIBUS DP-V1 release 3.0 or higher
• TACC release 2.2 or higher
and supports baud rates up to 12 MBit/s.
* The TH LINK supports the marked applications as well as the preinstalled TH SCOPE easy
with baud rates up to 1,5 MBit/s.
7. Mean Time Between Failures
The MTBF value is 701,543 hours.
8. New and changed functions
New functions
• Display of the number of diagnostics in the Error statistics
• Filtering of data
• Hide/show table columns
Changed functions
• Navigation in the navigation tree is possible to the second level. The information of the
views from the third and fourth level are integrated in the inventory.
• Master list, Slave list and module list were deleted and the information was integrated
in the inventory.
• Device type, device ID and vendor are included in inventory.
• Time synchronisation: When the measurement is started without a valid time server or
taken over computer system time, all diagnostics will be displayed with a time stamp
of 1970. If a computer system time is taken over later, all previously occurred diagnos-
tics will be recalculated to the correct date.
9. Bug Fixes
• In some cases failures were displayed, although no failures occurred.