Owner's manual

ManualsBrandsVEGA ManualsAccessories communicationPROFIBUS PA T-Connector

PROFIBUS PA T-Connector

The PROFIBUS-PA T-Connector is

intended for the coupling of sensors,

actuators and measuring instruments.

•Type of protection IP 66

• Modular design

• Non-interrupted BUS operations, also

when being serviced

•Easy to use

• Low installation costs

• External grounding cable

•Pressure-compensation element

• EMC cable gland

PROFIBUS-PA T-Connector

standard

• 1, 2, 4, 8-way

with EMC gland

industrial + EX / ATEX

• Overvoltage protection optional

The PROFIBUS-PA installation products

are increasingly found in the

• Food industries

• Fine and speciality chemicals

• Bulk chemicals industry

The range is designed to accommodate a

wide range of customer requirements in

the harshest of environments.

These include Standard and Hazardous

Area Versions with either single or multiple

quick-connection variants with M12

connector or cable gland.

Weidmüller offers, for almost every appli-

cation, a solution. In the case you don’t

see your solution here, please contact

your local sales office.

• For industrial application

• Standard

Summary of content (8 pages)

PAGE 1
PROFIBUS PA T-Connector • For industrial application • Standard The PROFIBUS-PA installation products are increasingly found in the PROFIBUS-PA T-Connector standard • Food industries • 1, 2, 4, 8-way with EMC gland industrial + EX / ATEX • Fine and speciality chemicals • Bulk chemicals industry • Overvoltage protection optional The PROFIBUS-PA T-Connector is intended for the coupling of sensors, actuators and measuring instruments.
PAGE 2
Field-bus components for industrial applications Shield is connected to the enclosure via the EMC cable glands. Thread the cable gland onto the seal, on the unprepared fieldbus cable Strip fieldbus cable here Fieldbus cable Shielding 6 8 Draw back the shielding braid over the sheath of the fieldbus cable 50 … 70 The PROFIBUS-PA Technical data for pages 52-54 is an open field-bus standard (EN 50 170, IEC 1158-2, DIN 19 245).
PAGE 3
Field-bus components for industrial applications with tension clamp connection The measuring instruments are connected using an M 12 connection. The screen is connected to the housing via the EMC cable gland. PROFIBUS-PA T-Connector standard 1-way Type FBCon PA CG/M12 1way 58 19 A S B A S B A S R1 off B C1 on Bus terminator: 64 off on Circuit diagram A S A S B B Bus Terminator 100R off on Wire bridge C1 1uF 50Vdc A S B n.c.
PAGE 4
Field-bus components for industrial applications with tension clamp connection The measuring instruments are connected directly in the distributor via the EMC cable gland. The screen is connected to the housing via the EMC cable gland.
PAGE 5
Field-bus components for industrial applications with tension clamp connection The measuring instruments are connected using an M 12 connection. The screen is connected to the housing via the EMC cable gland.
PAGE 6
Field-bus components for industrial applications with tension clamp connection The measuring instruments are connected directly in the distributor via the EMC cable gland. The screen is connected to the housing via the EMC cable gland. PROFIBUS-PA T-Connector EMC version 4-way Type FBCon PA CG 4way 19 S B A S B A S B A S B A S B A S B 80 A off on R1 C1 Bus terminator: 125 A S B A S B Bus Terminator pluggable 100R Wire bridge Enclosure A S B A S B A S B n.c.
PAGE 7
PROFIBUS PA distributor with screw connection PROFIBUS-PA T-Connector standard PROFIBUS-PA T-Connector with 3 PG cable glands Circuit diagram Circuit diagram Terminal on pcb Terminal on pcb 100R B B C2 0.01 µF 250V ~ C1 1.0 µF 63V = S PROFIBUS-PA PA + A C1 1.0 µF 63V = S S A 100R B PROFIBUS-PA PA - S A S A off: no Bus Terminator (delivery status) on: Bus Terminator active off: no Bus Terminator (delivery status) on: Bus Terminator active Ordering data Ordering data Cat. No.
PAGE 8
PROFIBUS PA distributor with screw connection PROFIBUS-PA -Connector 2-way PROFIBUS-PA field-bus cable Circuit diagram Bus Terminator off < 20 A PA - A PA - S Shielding S 64 Shielding < 20 98 on B PA + S S B A Shielding PA - Cat. No.