Owner manual

INSYS GPRS 5.0 serial Connections, Display and Control Elements
107
Pin No. V-24 RS232 66020
1 DCD Data Carrier Detect 109 CF M5 O
2 RXD Receive Data 104 BB D2 O
3 TXD Transmit Data 103 BA D1 I
4 DTR Data Terminal Ready 108 CD S1 I
5 GND Ground 102 AB E2
6 DSR Data set ready 107 CC M1 O
7 RTS Request to send 105 CA S2 I
8 CTS Clear To Send 106 CB M2 O
9 RI Ring Indication 125 CE M3 O
13.2 SIM card
The INSYS GPRS 5.0 serial requires a 3V/1.8V SIM card from a GSM provider for
operation. The SIM card is the identification for the network provider.
The SIM card must be placed into the carrier with the contacts downward to en-
sure that the contacts are on top of each other.
Change the SIM card only when the device is switched off.