Instruction Manual
Table Of Contents
- Modem Blaster V.92 External DE5721
- Getting Started
- Contents
- Important Safety Instructions
- Introduction
- About Your Modem
- Installing Hardware
- Installing Software
- Uninstalling Modem Drivers
- Modem Features
- General Specifications
- Troubleshooting
- Creative Technical Support

General Specifications A-1
General Specifications
This appendix lists your modem’s general specifications.
General Features ❑ Auto Fallback
❑ AT Commands
❑ Caller ID
❑ Data/Fax/Voicemail
❑ V.80 for H.324 and H.323
❑ Plug and Play
❑ High throughput Virtual UART, DTE rate up to 115,200 bps
❑ Signal Quality Monitoring and Auto Retrain
Data Features ❑ Integrated data, fax, and voice mail modem.
❑ 56,000/54,667/53,333/52,000/50,667/49,333/48,000/46,667/45,333/42,667/41,333//40,000/38,667/
37,333/36,000/34,667/33,333/32,000/30,667/33,600/31,200/28,800/26,400/24,000/21,600/19,200/
16,800/14,400/12,000/9,600/7,200/4,800/2,400/1,200/ 300 bps data speeds.
❑ Compatibility with the following data modem standards:
• V.90, V.92, V.34, V.32bis, V.32, V.23, V.22bis, V.22, and V.21; Bell 212A
and 103.
• V.42 LAPM and MNP2-4 error correction.
• V.44, V.42bis and MNP5 data compression.
❑ Compression, line control, and error control are implemented in hardware. Therefore, no special
drivers or libraries are needed to take advantage of the higher speeds and data reliability.
❑ Automatic dial and answer capabilities.