User Manual

2 Moun
ting
Take note of the attached mounting instructions and the operating
instructions manual of the corresponding VEGAFLEX level sensor.
The seals for the connection flanges and ventilation fitting (optional)
must be provided by the customer.
The seal on the measuring instrument flange (A) and the rinsing
connection (D) are already mounted ex works.
Before use, check if the seal material is resistant against the medium,
the process pressure and the process temperature.
The max. permissible pressure of the sensor is specified in the
operating instructions manual of the sensor in chapter "Technical data"
or on the type label of the sensor.
Operating instructions
Seals
Bypass 72 • with VEGAFLEX level
sensor 3
2 M
ounting
33545-EN-081216