Instruction Manual

4 Carrier BGT 596, 596 Ex.M
Operating instruction
1.3 Technical data
BGT 596
Mechanical data
Dimensions W x H x D = 482,6 (19“) x 132,5 x 254
Module positions choice out of 84 positions
Connection of protector tongue 2 x 6,3 x 0,8
Blind cover 4 TE (4 x 5,08 = 20,32 mm)
Protective measures
Wiring side IP 00
Upper and lower side IP 00
Front side (completely equipped) IP 30
IP 40 (with series 500 new)
Module (consisting of)
Guide rails 2 pcs.
Instrument coded key 2 pcs.
Fixing screw 2 pcs. M2,5
Multipoint connector 1 pce.
- type DIN 41 612, series F, 32-/33-pole, d, b, z
- connection see following list
Wire-Wrap 1,0 x 1,0 mm Article no. Module- 33 A 32 A
Plug 2,8 x 0,8 mm 33 B 32 B
Termi-Point 1,6 x 0,8 mm 33 C 32 C
Soldering connection 33 D 32 D
Screw connection 33 E ––
Connection for signal conditioning VEGATOR 521 525 F
instruments 522
523
527
VEGAMET 513 507 Z
514, 514 V
514 D,
514 VD
515, 515 V
VEGASEL 543, 544
545, 546
547
VEGACOM 557
1)
VEGASTAB 593-60, 593 and 594 power supply
units are offered completely, i.e. inclusive
module as multipoint connector series H, 15-pole
with plug 6,3 mm
1)
(with earth terminal for screened cable)