Level and Pressure Operating Instruction Retrofitting of the display Indicating module 12 (AM12) 8888
Contents Contents Safety information ........................................................................ 2 Note Ex-area ............................................................................... 2 1 Product description 1.1 Function and configuration ................................................. 3 1.2 Technical data ...................................................................... 3 2 Electrical connection ................................................................ 4 3 Set-up 3.
Product description 1 Product description 1.1 Function and configuration The display is a digital indicating instrument without auxiliary energy for mounting to pressure transmitters D84 / D85 with LC-display for digital and quasianalogue demonstration. Function The display enables the indication of values between -9999 and 9999. The decimal point can be shifted. The indicated unit can be chosen individually. Configuration The display can be connected to any active 4 … 20 mA-output.
Electrical connection 2 Electrical connection - S Op Z + ti Indication 1 + 2 3 - 4...20mA 4 5 AM12 12...
Set-up 3 Set-up 3.1 Indicating and adjustment elements 5 4 2 6 P EZ Op 7 3 8 1 12 Zum Anschluß an For connection to S Z ti VEGA-Auswertgeräte Op VEGA-signal conditioning instruments AM12 4...20mA AM12 12V...36V DC Bedieneinsatz 13 Klemmeinsatz operating unit terminal 10 9 11 Fig.
Set-up Rotating switch With the rotating switch you choose the appropriate mode. OPERATE indication of measured value ZERO adjustment of min. value (4 mA) END adjustment of max. value (20 mA) POINT shifting of decimal point Plus/Minus key With these two keys you modify the value of the digital indication. When you keep the key pushed, the digital indication changes the value in three speeds. After each 28 steps, the counting speed increases by one step.
Set-up 3.3 Adjustment • The indication required the adjustment of the values for 4 mA and 20 mA. Proceed as follows: Set the rotating switch to position „POINT“ and push one of the keys. The digital indication starts flashing. By pushing the keys again you move the decimal point. The minus key moves the decimal point to the left, the plus key to the right. • Set the rotating switch to position „ZERO“ and push the plus key to increase the indication value or the minus key to reduce the indication value.
VEGA Grieshaber KG Am Hohenstein 113 D-77761 Schiltach Phone (0 78 36) 50 - 0 Fax (0 78 36) 50 - 201 e-mail info@vega-g.de ISO 9001 The statements on types, application, use and operating conditions of the sensors and processing systems correspond to the actual knowledge at the date of printing. Technical data subject to alteration. 2.23 126 / Nov.
