Operation Manual

59Vectron POS Modular
Modular
US
Supplement
Important notes for the connection of scales
1. When connecting scales you have to heed the respective national
regulations. Within the EU it applies: You require a test certificate
for the respective combination of Vectron POS System, software
and scales. The conditions mentioned therein must be fulfilled.
2. Check of certified software
Proceed as follows to check that Vectron POS Modular runs the
correct software:
a) Switch off the POS system.
b) Touch the screen and keep it touched.
c) Switch on the POS system.
d) Touch the screen until „Starting drivers ...“ and then „Calibra-
tion is cleared in n seconds“ is displayed.
e) Touch the „Module inform.“ button.
„Scale generic protocol 02/04 Version 1.01a“ must be displayed
(see below).