Operation Manual

37Vectron POS Modular
Modular
US
9.3 Reports
The Vectron POS System offers numerous possibilities to combine
the bookings of a certain period or operator in a report. You can
select all reports via the <Mode> key or <M> or via special keys and
print them afterwards.
It is also possible to read reports by means of the PC program Vec-
tron Commander and to process them on the computer.
Note
It depends on the programming and on the operators’
authorization which reports can be called. Please con-
tact your Vectron dealer.
When pressing the <Mode> or <M> key you can select between „X-
reports“ and „Z-reports“.
„X-Reports“ are interim reports, the memory is not deleted. All data
is kept for further reading and processing.
„Z-Reports“ are final reports, the memory is reset to zero and the
report cannot be restored!
After choosing either an X-report or a Z-report, you may decide which
report is to be printed. The following are short descriptions of some
of the most common reports:
Cashiers
An overview of the financial data for each cashier.
Cashier (single)
An overview of the financial data for only one cashier.