Operation Manual

31
Vectron POS Modular
Modular
US
8 LED-Signals
At the front blind of the Vectron POS Modular you see the type tag
and five diodes (LED). The latter show different operating- and error
modes.
„Power“-LED (green)
The „Power“-LED indicates whether the POS Modular is supplied
with operating voltage.
LED on ................................................ POS system has operating voltage
and is switched on.
LED off ............................................... POS system has no operating voltage
or is switched off.
„Warning“-LED (yellow)
The „Warning“-LED shows error messages of the POS Modular, which
do not impede the operation.
LED blinks ........................................ error message
LED off ............................................... no error message
„Network“-LED (green)
The „Network“-LED indicates if and how the POS Modular is active
in the ECR network.
LED on ................................................ POS system is logged on to the ECR
network, but no network traffic.
LED blinks ........................................ POS system is configured for ECR
network, but communication is not
established (network connector
unplugged, cable is cut etc.).
LED blinks quickly ........................ POS system is logged on to the ECR
network and sends or receives data.
LED off: .............................................. POS system is not configured for ECR
network.