Operation Manual

12 Vectron POS Modular
4 Instructions for use
Please follow these instructions:
• Only operatethe POS systemwith thedealer installed periphe-
rals.
• Do not insert any foreign objects into any openings on the de-
vices.
• The power supply Vectron PS10 must be plugged into a properly
grounded outlet.
• ThePOSsystemmaynotbeexposedtodirectsunlight.Ensure
there is sufficient airflow around the device to allow for adequate
cooling.
• ProtectthePOSsystemfromdustandhumidity.
• ProtectthePOSsystemfromimpropervoltages.
• Cleanonlywithadampclothusingamildcleanser.
• BeforeopeningthehousingoftheVectronPOSsystem,unplugit
from the outlet.
• Keep the packaging material for dispatch puposes.
In case of service please contact your Vectron dealer. When sending
the device for repair always use the original packing. For damages
due to improper packing the manufacturer does not accept liability .