Operation Manual
Table Of Contents
- 1. Terms, signs and symbols
- 2. General notes on safety
- 3. About this manual
- 4. Specification
- 5. Device description
- 6. Starting
- 6.1. MobileTouchet up of 53 charging station
- 6.2. Inserting and charging B50 batteries
- 6.3. Installing a wireless network
- 6.4. Installing Bluetooth
- 6.5. Attaching the wrist strap at the MobileTouch POS system
- 6.6. Attaching the safety strap at the MobileTouch POS system
- 6.7. Attaching the leather holster
- 6.8. Fastening the belt
- 6.9. Attaching the safety strap at the leather holster
- 7. Operation
- 7.1. MobileToucholding the 75 POS system
- 7.2. Transporting the MobileTouch POS system
- 7.3. Switching on the MobileTouch POS system and switching it to quiescent condition
- 7.4. Charging the battery B50
- 7.5. Exchanging the battery
- 7.6. Entering data to the MobileTouch POS system
- 7.7. Sign in and out at the MobileTouch POS system
- 7.8. Working with guest checks
- 7.8.1. Opening a GC
- 7.8.2. Booking PLUs to a guest check
- 7.8.3. Closing a GC
- 7.8.4. Finalizing a GC
- 7.8.5. Splitting PLUs of a guest check to invoice
- 7.8.6. Splitting single PLUs of a guest check to another guest check
- 7.8.7. Moving all PLUs of one guest check to another guest check
- 7.8.8. Transferring a guest check to another operator
- 7.9. Working with reports
- 7.10. Void and Correction
- 7.11. Using a wireless network for data transfer
- 7.12. Restarting the MobileTouch POS system
- 8. Shut down
- 9. Errors, possible reasons and troubleshooting
- 10. Service and maintenance
- 11. Disposal
- 12. Glossary
- 13. Icons
- 14. EC Declaration of conformity
- 15. Accessories
- 16. Other Vectron products
92
VECTRON POS MOBILETOUCH
7.8. Working with guest checks
This chapter informs you about the guest check (GC) func-
tion. Whether or not you can use this function depends on
programming and configuration of your MobileTouch POS
system.
The GC function serves for separate storage of bookings
for several customers. It is useful for instance in hospital-
ity, to store food and drinks separately for each table in a
restaurant.
Your Vectron dealer can program and configure the num-
ber of GCs and operators according to your requests.
i
Buttons that are mentioned in this chap-
ter and that can be displayed as graphi-
cal elements, are shown in chapter 13
“Icons” on page 122.
7.8.1. O pening a GC
In order to store GC bookings you first have to open a GC.
GCs, for which an invoice was not yet generated, can be
opened again with this function.
• Enter the GC number to the numeric pad.
• Press the <GC> button to open the guest check.