Operation Manual
Table Of Contents
- 1. Terms, signs and symbols
- 2. General notes on safety
- 3. About this manual
- 4. Specification
- 5. Device description
- 6. Starting
- 6.1. MobileTouchet up of 53 charging station
- 6.2. Inserting and charging B50 batteries
- 6.3. Installing a wireless network
- 6.4. Installing Bluetooth
- 6.5. Attaching the wrist strap at the MobileTouch POS system
- 6.6. Attaching the safety strap at the MobileTouch POS system
- 6.7. Attaching the leather holster
- 6.8. Fastening the belt
- 6.9. Attaching the safety strap at the leather holster
- 7. Operation
- 7.1. MobileToucholding the 75 POS system
- 7.2. Transporting the MobileTouch POS system
- 7.3. Switching on the MobileTouch POS system and switching it to quiescent condition
- 7.4. Charging the battery B50
- 7.5. Exchanging the battery
- 7.6. Entering data to the MobileTouch POS system
- 7.7. Sign in and out at the MobileTouch POS system
- 7.8. Working with guest checks
- 7.8.1. Opening a GC
- 7.8.2. Booking PLUs to a guest check
- 7.8.3. Closing a GC
- 7.8.4. Finalizing a GC
- 7.8.5. Splitting PLUs of a guest check to invoice
- 7.8.6. Splitting single PLUs of a guest check to another guest check
- 7.8.7. Moving all PLUs of one guest check to another guest check
- 7.8.8. Transferring a guest check to another operator
- 7.9. Working with reports
- 7.10. Void and Correction
- 7.11. Using a wireless network for data transfer
- 7.12. Restarting the MobileTouch POS system
- 8. Shut down
- 9. Errors, possible reasons and troubleshooting
- 10. Service and maintenance
- 11. Disposal
- 12. Glossary
- 13. Icons
- 14. EC Declaration of conformity
- 15. Accessories
- 16. Other Vectron products
66
VECTRON POS MOBILETOUCH
6.4. Installing Bluetooth
Bluetooth serves e.g. for wireless connection of the
MobileTouch POS system to printers.
Your Vectron dealer can install Bluetooth for you. Please
read the following hints and contact your Vectron dealer
for questions and requests concerning programming and
configuration.
The performance of Bluetooth, e.g. the range of the radio
signal, depends on the applied access point and on obsta-
cles. Obstacles like for instance trees, walls and people,
which stand between the antenna of the MobileTouch POS
system and the Bluetooth antenna, reduce the range.
6.5. Attaching the wrist strap at the MobileTouch
POS system
This chapter tells you how to attach the wrist strap at the
MobileTouch POS system.
In the following we describe how to attach the wrist strap,
when holding the MobileTouch in the left hand and operat-
ing it with the right hand.
You can attach the wrist strap at the opposite lug so that
you hold the MobileTouch in the right hand and operate it
with the left.