Operation Manual
Table Of Contents
- 1. Terms, signs and symbols
- 2. General notes on safety
- 3. About this manual
- 4. Specification
- 5. Device description
- 6. Starting
- 6.1. MobileTouchet up of 53 charging station
- 6.2. Inserting and charging B50 batteries
- 6.3. Installing a wireless network
- 6.4. Installing Bluetooth
- 6.5. Attaching the wrist strap at the MobileTouch POS system
- 6.6. Attaching the safety strap at the MobileTouch POS system
- 6.7. Attaching the leather holster
- 6.8. Fastening the belt
- 6.9. Attaching the safety strap at the leather holster
- 7. Operation
- 7.1. MobileToucholding the 75 POS system
- 7.2. Transporting the MobileTouch POS system
- 7.3. Switching on the MobileTouch POS system and switching it to quiescent condition
- 7.4. Charging the battery B50
- 7.5. Exchanging the battery
- 7.6. Entering data to the MobileTouch POS system
- 7.7. Sign in and out at the MobileTouch POS system
- 7.8. Working with guest checks
- 7.8.1. Opening a GC
- 7.8.2. Booking PLUs to a guest check
- 7.8.3. Closing a GC
- 7.8.4. Finalizing a GC
- 7.8.5. Splitting PLUs of a guest check to invoice
- 7.8.6. Splitting single PLUs of a guest check to another guest check
- 7.8.7. Moving all PLUs of one guest check to another guest check
- 7.8.8. Transferring a guest check to another operator
- 7.9. Working with reports
- 7.10. Void and Correction
- 7.11. Using a wireless network for data transfer
- 7.12. Restarting the MobileTouch POS system
- 8. Shut down
- 9. Errors, possible reasons and troubleshooting
- 10. Service and maintenance
- 11. Disposal
- 12. Glossary
- 13. Icons
- 14. EC Declaration of conformity
- 15. Accessories
- 16. Other Vectron products
56
VECTRON POS MOBILETOUCH
6.2. Inserting and charging B50 batteries
This chapter tells you how to insert the B50 batteries to
the MobileTouch charging station and the MobileTouch POS
system and how to charge them.
Before using the MobileTouch POS system for the first time
you have to charge the supplied battery B50 completely.
You can charge up to three batteries B50 simultaneously
in the MobileTouch charging station: two batteries in the
compartments of the charging station and another one,
when it is inserted in the MobileTouch POS system and the
POS system is inserted in the charging station.
6.2.1. Inserting and charging B50 batteries in the
MobileTouch charging station
This chapter tells you how to insert the B50 batteries to
the MobileTouch charging station and how to charge them.
The MobileTouch charging station has to be prepared as
described in chapter 6.1 “Set up of MobileTouch charging
station” on page 53 to charge B50 batteries.
You can charge up to two batteries B50 simultaneously in
the compartments of the MobileTouch charging station.
NOTICE
a
Damage of MobileTouch charging
station through unapproved batteries
X
Check the battery label prior to
insertion
X
Insert exclusively B50 batteries