Operation Manual
Table Of Contents
- 1. Terms, signs and symbols
- 2. General notes on safety
- 3. About this manual
- 4. Specification
- 5. Device description
- 6. Starting
- 6.1. MobileTouchet up of 53 charging station
- 6.2. Inserting and charging B50 batteries
- 6.3. Installing a wireless network
- 6.4. Installing Bluetooth
- 6.5. Attaching the wrist strap at the MobileTouch POS system
- 6.6. Attaching the safety strap at the MobileTouch POS system
- 6.7. Attaching the leather holster
- 6.8. Fastening the belt
- 6.9. Attaching the safety strap at the leather holster
- 7. Operation
- 7.1. MobileToucholding the 75 POS system
- 7.2. Transporting the MobileTouch POS system
- 7.3. Switching on the MobileTouch POS system and switching it to quiescent condition
- 7.4. Charging the battery B50
- 7.5. Exchanging the battery
- 7.6. Entering data to the MobileTouch POS system
- 7.7. Sign in and out at the MobileTouch POS system
- 7.8. Working with guest checks
- 7.8.1. Opening a GC
- 7.8.2. Booking PLUs to a guest check
- 7.8.3. Closing a GC
- 7.8.4. Finalizing a GC
- 7.8.5. Splitting PLUs of a guest check to invoice
- 7.8.6. Splitting single PLUs of a guest check to another guest check
- 7.8.7. Moving all PLUs of one guest check to another guest check
- 7.8.8. Transferring a guest check to another operator
- 7.9. Working with reports
- 7.10. Void and Correction
- 7.11. Using a wireless network for data transfer
- 7.12. Restarting the MobileTouch POS system
- 8. Shut down
- 9. Errors, possible reasons and troubleshooting
- 10. Service and maintenance
- 11. Disposal
- 12. Glossary
- 13. Icons
- 14. EC Declaration of conformity
- 15. Accessories
- 16. Other Vectron products
39
EN
Locking sensor pos. 1
The locking sensor registers whether the battery compart-
ment cover is attached to the MobileTouch POS system.
If the cover is not attached, you cannot switch on the
MobileTouch POS system.
Label pos. 2
The label serves for unambiguous identification of the
MobileTouch POS system. It contains the product designa-
tion and the serial number of the MobileTouch POS system.
Contacts for battery B50 pos. 3
The MobileTouch POS system is supplied with power via the
contacts of the battery B50.
The inserted battery B50 is charged via the contacts for
the battery B50, when the MobileTouch POS system is
inserted in the charging station.
Contacts for MobileTouch charging station pos. 4
The battery B50, which is inserted in the battery compart-
ment, is charged via the contacts for the MobileTouch
charging station.
Battery compartment pos. 5
To the battery compartment you insert the battery B50,
which is included in shipment.
Battery release pos. 6
The battery release serves for removing the battery B50
from the battery compartment.