Operation Manual
Table Of Contents
- 1. Terms, signs and symbols
- 2. General notes on safety
- 3. About this manual
- 4. Specification
- 5. Device description
- 6. Starting
- 6.1. MobileTouchet up of 53 charging station
- 6.2. Inserting and charging B50 batteries
- 6.3. Installing a wireless network
- 6.4. Installing Bluetooth
- 6.5. Attaching the wrist strap at the MobileTouch POS system
- 6.6. Attaching the safety strap at the MobileTouch POS system
- 6.7. Attaching the leather holster
- 6.8. Fastening the belt
- 6.9. Attaching the safety strap at the leather holster
- 7. Operation
- 7.1. MobileToucholding the 75 POS system
- 7.2. Transporting the MobileTouch POS system
- 7.3. Switching on the MobileTouch POS system and switching it to quiescent condition
- 7.4. Charging the battery B50
- 7.5. Exchanging the battery
- 7.6. Entering data to the MobileTouch POS system
- 7.7. Sign in and out at the MobileTouch POS system
- 7.8. Working with guest checks
- 7.8.1. Opening a GC
- 7.8.2. Booking PLUs to a guest check
- 7.8.3. Closing a GC
- 7.8.4. Finalizing a GC
- 7.8.5. Splitting PLUs of a guest check to invoice
- 7.8.6. Splitting single PLUs of a guest check to another guest check
- 7.8.7. Moving all PLUs of one guest check to another guest check
- 7.8.8. Transferring a guest check to another operator
- 7.9. Working with reports
- 7.10. Void and Correction
- 7.11. Using a wireless network for data transfer
- 7.12. Restarting the MobileTouch POS system
- 8. Shut down
- 9. Errors, possible reasons and troubleshooting
- 10. Service and maintenance
- 11. Disposal
- 12. Glossary
- 13. Icons
- 14. EC Declaration of conformity
- 15. Accessories
- 16. Other Vectron products
29
EN
Technical data of the MobileTouch POS system
Housing two-part magnesium housing,
splash-proof
Processor
Marvell PXA270, 416 MHz
Arbeitsspeicher
128 MB SDRAM
Main memory
1 GB Flash memory
USB port
USB Mini-B
SD-card slot for MicroSD cards up to 4 GB and
MicroSDHC cards up to 32 GB
Wireless LAN
IEEE 802.11b/g
Bluetooth
2.0 + EDR
Audio mono loudspeaker, 1 W
Orientation sensor four-way orientation sensor
Vibration alarm integrated
Power supply Lithium-ion battery, 2200 mAh
Buffer battery integrated
Power consumption
0.6 to 2.5 W
Temperature storage: -20 to 70 °C
operation: -10 to 50 °C
Air humidity 10 to 80 %, non condensing
Dimensions
(W x H x D)
8.19 x 15.99 x 2.3 cm
Weight
300 g, incl. battery
Certified CE, FCC
4.5.2. Battery B50
Technical data of the Battery B50
Type
Lithium-ion battery
Charging capacity
2200 mAh
Voltage
3.7 V