Operation Manual
Table Of Contents
- 1. Terms, signs and symbols
- 2. General notes on safety
- 3. About this manual
- 4. Specification
- 5. Device description
- 6. Starting
- 6.1. MobileTouchet up of 53 charging station
- 6.2. Inserting and charging B50 batteries
- 6.3. Installing a wireless network
- 6.4. Installing Bluetooth
- 6.5. Attaching the wrist strap at the MobileTouch POS system
- 6.6. Attaching the safety strap at the MobileTouch POS system
- 6.7. Attaching the leather holster
- 6.8. Fastening the belt
- 6.9. Attaching the safety strap at the leather holster
- 7. Operation
- 7.1. MobileToucholding the 75 POS system
- 7.2. Transporting the MobileTouch POS system
- 7.3. Switching on the MobileTouch POS system and switching it to quiescent condition
- 7.4. Charging the battery B50
- 7.5. Exchanging the battery
- 7.6. Entering data to the MobileTouch POS system
- 7.7. Sign in and out at the MobileTouch POS system
- 7.8. Working with guest checks
- 7.8.1. Opening a GC
- 7.8.2. Booking PLUs to a guest check
- 7.8.3. Closing a GC
- 7.8.4. Finalizing a GC
- 7.8.5. Splitting PLUs of a guest check to invoice
- 7.8.6. Splitting single PLUs of a guest check to another guest check
- 7.8.7. Moving all PLUs of one guest check to another guest check
- 7.8.8. Transferring a guest check to another operator
- 7.9. Working with reports
- 7.10. Void and Correction
- 7.11. Using a wireless network for data transfer
- 7.12. Restarting the MobileTouch POS system
- 8. Shut down
- 9. Errors, possible reasons and troubleshooting
- 10. Service and maintenance
- 11. Disposal
- 12. Glossary
- 13. Icons
- 14. EC Declaration of conformity
- 15. Accessories
- 16. Other Vectron products
26
VECTRON POS MOBILETOUCH
4.4. Use as directed
The MobileTouch POS system may be used as mobile sys-
tem. The MobileTouch charging station may be used for
charging B50 batteries.
The MobileTouch charging station has to be connected to a
grounded socket using the supplied cable with safety plug
and the power supply EA10301. Using other power supplies
and cables is not as directed. The power supply network
must be protected with a fault current circuit breaker.
MobileTouch POS system, MobileTouch charging station,
power supply EA10301 and battery B50 must not be
opened. POS system, charging station and the accessories
must not be modified.
The operating company of the MobileTouch system is
responsible for storage and backup of data that is created
with the MobileTouch . The data is to be processed and
stored in such a way that they comply with e.g. the de-
mands of fiscal authorities.
Depending on configuration and programming of the
Vectron POS software, operators can modify the stored
data, configuration and programming of the MobileTouch,
for instance the PLU- or rights table for operators. Fur-
thermore, operators can carry out functions like void if
these are enabled in the rights management of the POS
system.
You should protect yourself against undesired changes of
the above mentioned parts of programming. This can be
achieved by using passwords.