Operation Manual
Table Of Contents
- 1. Terms, signs and symbols
- 2. General notes on safety
- 3. About this manual
- 4. Specification
- 5. Device description
- 6. Starting
- 6.1. MobileTouchet up of 53 charging station
- 6.2. Inserting and charging B50 batteries
- 6.3. Installing a wireless network
- 6.4. Installing Bluetooth
- 6.5. Attaching the wrist strap at the MobileTouch POS system
- 6.6. Attaching the safety strap at the MobileTouch POS system
- 6.7. Attaching the leather holster
- 6.8. Fastening the belt
- 6.9. Attaching the safety strap at the leather holster
- 7. Operation
- 7.1. MobileToucholding the 75 POS system
- 7.2. Transporting the MobileTouch POS system
- 7.3. Switching on the MobileTouch POS system and switching it to quiescent condition
- 7.4. Charging the battery B50
- 7.5. Exchanging the battery
- 7.6. Entering data to the MobileTouch POS system
- 7.7. Sign in and out at the MobileTouch POS system
- 7.8. Working with guest checks
- 7.8.1. Opening a GC
- 7.8.2. Booking PLUs to a guest check
- 7.8.3. Closing a GC
- 7.8.4. Finalizing a GC
- 7.8.5. Splitting PLUs of a guest check to invoice
- 7.8.6. Splitting single PLUs of a guest check to another guest check
- 7.8.7. Moving all PLUs of one guest check to another guest check
- 7.8.8. Transferring a guest check to another operator
- 7.9. Working with reports
- 7.10. Void and Correction
- 7.11. Using a wireless network for data transfer
- 7.12. Restarting the MobileTouch POS system
- 8. Shut down
- 9. Errors, possible reasons and troubleshooting
- 10. Service and maintenance
- 11. Disposal
- 12. Glossary
- 13. Icons
- 14. EC Declaration of conformity
- 15. Accessories
- 16. Other Vectron products
22
VECTRON POS MOBILETOUCH
4.1. MobileTouch POS system
The MobileTouch is a mobile POS system, which you can
also use without network connection.
Its light and splash-proof magnesium housing is extremely
shock-resistant.
Via the touch screen you enter data like e.g. PLUs by using
the finger or a touch pen.
The MobileTouch system transfers data per wireless LAN.
It supports the WEP security standard for data encryption.
Via the wireless network connection you can e.g. update
the Vectron POS software and read booking data.
The MobileTouch POS system can connect to several ac-
cess points. It selects the access point with the strongest
radio signal. Thanks to this function a large reception- and
transmission range is covered. Your Vectron dealer can
check for you whether the MobileTouch POS system can be
integrated in an existing Wireless LAN.
Bluetooth allows the wireless connection of devices via
short distances to the MobileTouch POS system, e.g. con-
nection of mobile printers.
When tilting the MobileTouch, a sensor recognizes the incli-
nation. Your Vectron dealer can configure the MobileTouch
so that the screen content is tilted by 180 degree, for
instance to show the customer an order or an invoice.
The MobileTouch POS system has an integrated loudspeak-
er. In case of system messages it can inform you by means
of sounds. Please ask your Vectron dealer to configure the
sounds for you.