Operation Manual
Table Of Contents
- 1. Terms, signs and symbols
- 2. General notes on safety
- 3. About this manual
- 4. Specification
- 5. Device description
- 6. Starting
- 6.1. MobileTouchet up of 53 charging station
- 6.2. Inserting and charging B50 batteries
- 6.3. Installing a wireless network
- 6.4. Installing Bluetooth
- 6.5. Attaching the wrist strap at the MobileTouch POS system
- 6.6. Attaching the safety strap at the MobileTouch POS system
- 6.7. Attaching the leather holster
- 6.8. Fastening the belt
- 6.9. Attaching the safety strap at the leather holster
- 7. Operation
- 7.1. MobileToucholding the 75 POS system
- 7.2. Transporting the MobileTouch POS system
- 7.3. Switching on the MobileTouch POS system and switching it to quiescent condition
- 7.4. Charging the battery B50
- 7.5. Exchanging the battery
- 7.6. Entering data to the MobileTouch POS system
- 7.7. Sign in and out at the MobileTouch POS system
- 7.8. Working with guest checks
- 7.8.1. Opening a GC
- 7.8.2. Booking PLUs to a guest check
- 7.8.3. Closing a GC
- 7.8.4. Finalizing a GC
- 7.8.5. Splitting PLUs of a guest check to invoice
- 7.8.6. Splitting single PLUs of a guest check to another guest check
- 7.8.7. Moving all PLUs of one guest check to another guest check
- 7.8.8. Transferring a guest check to another operator
- 7.9. Working with reports
- 7.10. Void and Correction
- 7.11. Using a wireless network for data transfer
- 7.12. Restarting the MobileTouch POS system
- 8. Shut down
- 9. Errors, possible reasons and troubleshooting
- 10. Service and maintenance
- 11. Disposal
- 12. Glossary
- 13. Icons
- 14. EC Declaration of conformity
- 15. Accessories
- 16. Other Vectron products
15
EN
2. General notes on safety
This chapter informs you about hazards that exist when operating
the MobileTouch.
Observe the following notes on safety by all means:
A DANGER
s
Risk of electric shock
•
High voltage at cable and power supply
X
Do not open power supplies
You will die or suffer from burns
X
Only use undamaged cables and power
supplies
X
Only use cables and power supplies in
original condition
X
Do not use liquids next to cable and
power supply
A DANGER
t
Danger through high temperatures
•
B50 batteries can catch fire
X
Do not expose B50 batteries to fire and
high temperatures
X
Do not open, drop, throw and modify B50
batteries
You will suffer from cauterization or burns
X
Charge B50 batteries at cell temperature
of 0 to 45 °C and air humidity of 45 to 85
percent
X
Discharge B50 batteries at cell
temperature of -20 to 60 °C and air
humidity of 45 to 85 percent
X
Store B50 batteries at room temperature
between -20 and 35 °C and air humidity
of 45 to 85 percent