Operation Manual
Table Of Contents
- 1. Terms, signs and symbols
- 2. General notes on safety
- 3. About this manual
- 4. Specification
- 5. Device description
- 6. Starting
- 6.1. MobileTouchet up of 53 charging station
- 6.2. Inserting and charging B50 batteries
- 6.3. Installing a wireless network
- 6.4. Installing Bluetooth
- 6.5. Attaching the wrist strap at the MobileTouch POS system
- 6.6. Attaching the safety strap at the MobileTouch POS system
- 6.7. Attaching the leather holster
- 6.8. Fastening the belt
- 6.9. Attaching the safety strap at the leather holster
- 7. Operation
- 7.1. MobileToucholding the 75 POS system
- 7.2. Transporting the MobileTouch POS system
- 7.3. Switching on the MobileTouch POS system and switching it to quiescent condition
- 7.4. Charging the battery B50
- 7.5. Exchanging the battery
- 7.6. Entering data to the MobileTouch POS system
- 7.7. Sign in and out at the MobileTouch POS system
- 7.8. Working with guest checks
- 7.8.1. Opening a GC
- 7.8.2. Booking PLUs to a guest check
- 7.8.3. Closing a GC
- 7.8.4. Finalizing a GC
- 7.8.5. Splitting PLUs of a guest check to invoice
- 7.8.6. Splitting single PLUs of a guest check to another guest check
- 7.8.7. Moving all PLUs of one guest check to another guest check
- 7.8.8. Transferring a guest check to another operator
- 7.9. Working with reports
- 7.10. Void and Correction
- 7.11. Using a wireless network for data transfer
- 7.12. Restarting the MobileTouch POS system
- 8. Shut down
- 9. Errors, possible reasons and troubleshooting
- 10. Service and maintenance
- 11. Disposal
- 12. Glossary
- 13. Icons
- 14. EC Declaration of conformity
- 15. Accessories
- 16. Other Vectron products
114
VECTRON POS MOBILETOUCH
Errors Possible reasons Troubleshooting
The battery B50 is
not charged when
inserted in the
MobileTouch charg-
ing station.
Another power pack
than the EA10301
is connected to the
MobileTouch charg-
ing station.
Connect the power
pack EA10301 to
the MobileTouch
charging station.
The battery B50 is
damaged.
Contact your Vec-
tron dealer.
The MobileTouch
power pack is dam-
aged.
Contact your Vec-
tron dealer.
The MobileTouch
charging station is
damaged.
Contact your Vec-
tron dealer.
The battery B50 is
not charged when
being inserted in
the MobileTouch
POS system and
the MobileTouch
POS system be-
ing inserted in the
charging station.
The safety plug is
not plugged to a
voltage-carrying
outlet.
Put the safety plug
is into a voltage-
carrying outlet that
is protected by a
fault-current circuit
breaker.
The plug of the
power pack is not
plugged to the
female jack of the
charging station.
Put the power pack
plug into the female
jack of the charging
station.
The charging
contacts of the
battery B50 have
no contact to the
charging contacts
in the MobileTouch
charging station.
Insert the battery
B50 to the charging
station so that the
charging contacts
touch each other.