Operation Manual
Table Of Contents
- 1. Terms, signs and symbols
- 2. General notes on safety
- 3. About this manual
- 4. Specification
- 5. Device description
- 6. Starting
- 6.1. MobileTouchet up of 53 charging station
- 6.2. Inserting and charging B50 batteries
- 6.3. Installing a wireless network
- 6.4. Installing Bluetooth
- 6.5. Attaching the wrist strap at the MobileTouch POS system
- 6.6. Attaching the safety strap at the MobileTouch POS system
- 6.7. Attaching the leather holster
- 6.8. Fastening the belt
- 6.9. Attaching the safety strap at the leather holster
- 7. Operation
- 7.1. MobileToucholding the 75 POS system
- 7.2. Transporting the MobileTouch POS system
- 7.3. Switching on the MobileTouch POS system and switching it to quiescent condition
- 7.4. Charging the battery B50
- 7.5. Exchanging the battery
- 7.6. Entering data to the MobileTouch POS system
- 7.7. Sign in and out at the MobileTouch POS system
- 7.8. Working with guest checks
- 7.8.1. Opening a GC
- 7.8.2. Booking PLUs to a guest check
- 7.8.3. Closing a GC
- 7.8.4. Finalizing a GC
- 7.8.5. Splitting PLUs of a guest check to invoice
- 7.8.6. Splitting single PLUs of a guest check to another guest check
- 7.8.7. Moving all PLUs of one guest check to another guest check
- 7.8.8. Transferring a guest check to another operator
- 7.9. Working with reports
- 7.10. Void and Correction
- 7.11. Using a wireless network for data transfer
- 7.12. Restarting the MobileTouch POS system
- 8. Shut down
- 9. Errors, possible reasons and troubleshooting
- 10. Service and maintenance
- 11. Disposal
- 12. Glossary
- 13. Icons
- 14. EC Declaration of conformity
- 15. Accessories
- 16. Other Vectron products
110
VECTRON POS MOBILETOUCH
Errors Possible reasons Troubleshooting
The MobileTouch
POS system does
not display any-
thing.
The battery B50 is
not inserted in the
compartment of the
MobileTouch POS
system.
Insert the battery
B50 to the com-
partment of the
MobileTouch POS
system as described
in chapter 6.2.2
“Inserting a bat-
tery B50 to the
MobileTouch POS
system” on page
59.
The battery com-
partment cover is
not attached at the
MobileTouch POS
system.
Put the cover to
the battery com-
partment of the
MobileTouch POS
system and fasten
the battery com-
partment screw
finger tight.
The battery B50 is
not charged.
Charge the bat-
tery B50 as de-
scribed in chapter
6.2.1 “Inserting
and charging B50
batteries in the
MobileTouch charg-
ing station” on page
56 or in chapter
6.2.3 “Inserting
the MobileTouch
POS system to the
charging station
and charging a bat-
tery B50” on page
62.