Operation Manual
Table Of Contents
- 1. Terms, signs and symbols
- 2. General notes on safety
- 3. About this manual
- 4. Specification
- 5. Device description
- 6. Starting
- 6.1. MobileTouchet up of 53 charging station
- 6.2. Inserting and charging B50 batteries
- 6.3. Installing a wireless network
- 6.4. Installing Bluetooth
- 6.5. Attaching the wrist strap at the MobileTouch POS system
- 6.6. Attaching the safety strap at the MobileTouch POS system
- 6.7. Attaching the leather holster
- 6.8. Fastening the belt
- 6.9. Attaching the safety strap at the leather holster
- 7. Operation
- 7.1. MobileToucholding the 75 POS system
- 7.2. Transporting the MobileTouch POS system
- 7.3. Switching on the MobileTouch POS system and switching it to quiescent condition
- 7.4. Charging the battery B50
- 7.5. Exchanging the battery
- 7.6. Entering data to the MobileTouch POS system
- 7.7. Sign in and out at the MobileTouch POS system
- 7.8. Working with guest checks
- 7.8.1. Opening a GC
- 7.8.2. Booking PLUs to a guest check
- 7.8.3. Closing a GC
- 7.8.4. Finalizing a GC
- 7.8.5. Splitting PLUs of a guest check to invoice
- 7.8.6. Splitting single PLUs of a guest check to another guest check
- 7.8.7. Moving all PLUs of one guest check to another guest check
- 7.8.8. Transferring a guest check to another operator
- 7.9. Working with reports
- 7.10. Void and Correction
- 7.11. Using a wireless network for data transfer
- 7.12. Restarting the MobileTouch POS system
- 8. Shut down
- 9. Errors, possible reasons and troubleshooting
- 10. Service and maintenance
- 11. Disposal
- 12. Glossary
- 13. Icons
- 14. EC Declaration of conformity
- 15. Accessories
- 16. Other Vectron products
107
EN
9. Errors, possible reasons and
troubleshooting
This chapter informs you about possible reasons for errors that
occur when operating the MobileTouch POS system and the
MobileTouch charging station. You learn how to remove them
yourself. Please contact your Vectron dealer if you cannot solve
the problem yourself.
9.1. MobileTouch POS system
Errors Possible reasons Troubleshooting
The MobileTouch
POS system cannot
be switched on.
The battery B50
is not inserted in
the battery com-
partment of the
MobileTouch POS
system.
Insert the battery
B50 to the com-
partment of the
MobileTouch POS
system as described
in chapter 6.2.2
“Inserting a bat-
tery B50 to the
MobileTouch POS
system” on page
59.
The battery com-
partment cover is
not attached to the
MobileTouch POS
system.
Put the cover to
the battery com-
partment of the
MobileTouch POS
system and fasten
the battery com-
partment screw
finger tight.