Operation Manual

Vectron POS Mini20
Vectron POS Mini 21
7.3 Reports
There are many different reports available. Reports can be selected
via the <Mode> key or via special keys and can be printed on the
integrated printer.
It is also possible to read reports by means of the PC program Vectron
Commander and to process them on the computer.
Note:
It depends on the clerks’ authorization which reports can be called.
Please contact your Vectron dealer.
By pressing <Mode>, the Vectron POS Mini can store and print X- and
Z-reports.
“X-reports” are interim reports, the memory is not deleted.
“Z-reports” are nal reports, the memory is reset to zero and the
report cannot be restored!
After choosing either an X-report or a Z-report, then you may decide
which report to print. The following are short descriptions of some of
the most common reports.
Cashiers
An overview of the nancial data for each cashier.
Cashier (single)
An overview of the nancial data for only one cashier.
Cashier invoices
Shows the invoices that were created by each cashier in the reporting
period.
• An X-report creates an intermediate bill with the guest check
still open for service.
• A Z-report creates a nal bill and closes the guest check.