Operation Manual

78
VECTRON POS MINI II
Errors Possible reasons Troubleshooting
The Mini II pro-
cesses other entries
than those made on
the touch screen.
Vectron POS soft-
ware has a malfunc-
tion.
Restart the Mini II
as described in
chapter 7.9 “Re-
starting Mini II” on
page 72 .
Programming and
configuration of
Mini II are faulty.
Contact your
Vectron dealer.
The touch screen is
damaged.
Contact your
Vectron dealer.
The sound repro-
duction at the
Mini II does not
work.
Loudspeakers are
connected but the
volume is too low.
Remove the loud-
speakers or in-
crease their volume.
The sound repro-
duction was not
programmed and
configured.
Contact your
Vectron dealer.
Loudspeakers are
damaged.
Exchange the loud-
speakers.
The audio connec-
tion is damaged.
Contact your
Vectron dealer.
Sign in by key via
the operator lock
to the Mini II is not
possible.
The operator lock
was not pro-
grammed and con-
figured.
Contact your
Vectron dealer.
Operator lock or
operator key are
damaged.
Contact your
Vectron dealer.