Operation Manual

77
EN
Errors Possible reasons Troubleshooting
The touch screen is
not calibrated.
Contact your
Vectron dealer.
Vectron POS soft-
ware has a malfunc-
tion.
Restart the Mini II
as described in
chapter 7.9 “Re-
starting Mini II” on
page 72 .
Programming and
configuration of
Mini II is faulty.
Contact your
Vectron dealer.
The touch screen is
damaged.
Contact your
Vectron dealer.
The flat keyboard is
damaged.
Contact your
Vectron dealer.
Mini II does not dis-
play anything.
Mini II is switched
off.
Press the On/Off
key as described
in chapter 7.1.1
“Switching on the
Mini II” on page
51 .
The screen saver is
active.
Touch the screen
with a finger or the
touch pen or press
a key on the key-
board film.
Vectron POS soft-
ware has a malfunc-
tion.
Contact your
Vectron dealer.
The PS30 is dam-
aged.
Contact your
Vectron dealer.
Mini II is damaged. Contact your
Vectron dealer.
The Mini II pro-
cesses other entries
than those made on
the touch screen.
The touch screen is
not calibrated.
Contact your
Vectron dealer.