Operation Manual

53
EN
7.2. Entering data to the Mini II
This chapter tells you how to enter data to the Mini II via
touch screen and flat keyboard. You are also informed
about the display elements.
Your display layout may differ from the one shown in this
manual, depending on programming and configuration of
your Mini II. Explanations in this user manual refer to the
Vectron hospitality user interface with version 1.0.1.
Prerequisite for entering data to the Mini II is that Mini II
was started as described in chapter 6 “Starting” on page
43 . You also have to switch on the Mini II as described
in chapter 7.1.1 “Switching on the Mini II” on page 51.