Operation Manual

be accessible to the respective operators. The passwords

must exclusively be known by the respective operators.

Operator rights must be assigned thoroughly, since opera-

tors - depending on their rights - can change or delete

data, configuration and programming of Mini II. These

changes can cause you financial damage or lead to penal

consequences, for instance if the stored data does no

longer comply with demands of the fiscal authorities.

The operating company is responsible for assigning the op-

erator rights. Prior to starting, your Vectron dealer should

draw up a concept for the assignment of operator rights

together with you. Each operator of Mini II should exclu-

sively be granted the rights he requires.

Your Vectron dealer is responsible for programming and

configuration of the Mini II. Vectron advises you not to

modify the programming and configuration yourself.

Please contact your Vectron dealer for any questions and

demands concerning programming and configuration.

Mini II and the power supply Vectron PS30 must be oper-

ated under ambient conditions as described in chapter 4.4

“Technical data” on page 25 . The Mini II must not be

set up in the open. Operating the components out of these

ambient conditions is not as directed.

The touch screen must exclusively be touched with touch

pen or fingers.

Operation of Mini II is exclusively allowed with Vec tron

original accessories or accessories approved by Vec tron.

Your Vectron dealer will inform you about accessories that

you can use together with the Mini II.