Operation Manual

VECTRON POS HARDWARE

12.2.4. Guest check split

It may often be necessary to split the guest check, if for

instance one guest wants to leave earlier than the others.

For these cases you have the function “G.C. Split”. This

function is only available for operators who have been ves-

ted with the according authorization.

To split a G.C., it must be opened again. If necessary close

the GC and open it again. Press the <GC split> key or

. Se-

lect the PLUs to be split via the direct PLU keys or via PLU

numbers. Having selected all PLUs close with <Cash> or

or another media key. The invoice is printed.

It may also happen that a guest changes the table. You can

then split PLUs from one GC to another.

Proceed as described above but before pressing the key

<GC split> or

enter the number of the GC to which the

PLUs are to be transferred. Close with <GC> key or

Guest check move12.2.5.

Rather than splitting single PLUs from one check to ano-

ther, “Check Move” allows the entire check to be moved to

another guest check. The operators must be vested with

the according authorization.

Open the G.C. to be moved. If the G.C. has already been •

opened, close it with <G.C.> or

and open it again via

GC no. and <GC> key or

. G.C. moves can only be car-

ried out if the G.C. is opened anew.

Enter the target guest check number and • close with <GC

move> key or

. The guest check that has been moved

is automatically closed.