Owner`s manual

VECTRIX ZEV OWNER’S MANUAL 9
FIG 1.0 ILLUSTRATES WHERE ITEMS
1–30 ARE LOCATED
1. TRIP A-B OR ODOMETER INDICATOR
Indicates mileage reading is currently displayed.
Use the select button (labeled ‘S’) to select
between Trip A, Trip B or the odometer.
2. TRIP ODOMETER INDICATOR
Can be displayed in either miles or kilometers by
selecting the button marked ‘K/M’.
3. ODOMETER OR TRIP A-B READING
Displays the mileage of the currently selected trip
or odometer. Use the button label “E/M” to switch
between km and MILES. If the wrench icon is
illuminated this will display an abbreviated fault
code. During charging this will display the highest
battery module temperature in C°.
4. ESTIMATED RANGE READING
Displays the estimated range available (km or
miles) based on your recent driving profile. Hard
accelerations and high speeds will decrease this
value. Soft accelerations and slower speeds will
increase this value. During charging this will
display the battery voltage.
5. BLUETOOTH INDICATOR
This indicator is installed for future
enhancements.
6. RF RANGE INDICATOR
RF signal strength for future enhancements.
7. READY INDICATOR
This is displayed when the system is ready to be
enabled.
8. GO INDICATOR
The GO Indicator will light up when the system is
enabled to accelerate.
9. BATTERY CHARGE/CHARGING INDICATOR
When the system is being charged by an external
power source, the Battery Charging Indicator will
illuminate.
10. CLOCK READING
Displays the time of day in either 12 or 24 hour
format. This will display the total charge time
while charging or the remaining cool down time
during the transition mode.
11. SPEEDOMETER (KM/H – MPH)
The speedometer displays your current speed
in both km/H and mph.During charging this
indicates the charge current times 10. For
example, if dial indicates 110, charge current is
11 amps.
12. ODOMETER READING
The odometer reading lets you see how many
total miles or kilometers you have traveled on
your Vectrix. During charging this will indicate the
charge mode and the charge termination voltage.
Modes are “CP” for constant power, “tr” for
transition or cool down, “EC” for end of charge,
and “CC” for constant current.
13. KM/H INDICATOR
Displays your speed in kilometers per hour.
14. MPH INDICATOR
Displays your speed in miles per hour.
15. LEFT DIR. INDICATOR LAMP TELLTALE
Flashes green when the left turn directional
is on and functioning properly. Illuminates a
steady green if one of the directionals is not
functioning.
16. PARKING/POSITION LAMPS TELLTALE
Illuminates green when the position lamps are in
use and working properly. If either is not working
the icon will flash.
INSTRUMENT CLUSTER