VECTOR FOG� USER MANUAL ULV FOGGER C20, C100 Plus, C150 Plus © 2016 Vectorfog is a trademark of Vectornate Ltd.
VECTOR FOG,.P> 01. SAFETY PRECAUTIONS • Ensure that the machine is connected to the right power supply. Plugging the machine to the wrong voltage, could cause the motor to overheat and catch fire. o DO NOT CONNECT 220V TO A 110V POWER SUPPLY. o DO NOT CONNECT 110V TO A 220V POWER SUPPLY. • If you need to replace the fuse, please use a 15 amp fuse with the correct voltage. Failure to use the right fuse, could cause an electrical fault or motor to overheat.
for 10 minutes 02.
⑨ ⑦ ⑦-2 ④ ⑦-1 ⑫ ① ② ⑨ ⑩ ⑤⑥ ⑭ ⑯ ⑮ ③ ⑧ ⑪ ⑬ ⑰
7. PCBS wi t c hAs s y 71. PCB 18. PowerCa bl e 72.
480x 200x 250mm 2L 525x 165x 305mm 630x 195x 310mm
+442038085797
VECTOR FOG� PRODUCT GUIDANCE 1. Please do not overfill the solution tank more than the following suggested amount: C20: 2.0L (less than 4 jugs of 500ml) C100+: 4.0L C150+: 6.0L 2. This machine is not for fogging any powder based solutions; these can cause blockages and damage to the machine. Only use solutions between the pH levels of 3 and 10. 3. Please do not lay the machine on the left side, right side or upside down. Always keep the machine upright.
TEL: ( UK) +442038085797/( KOREA)+82( 0) 7046942489/( US)+12014829835 Emai l :i nf o@vect or f og.
