Specifications

96 www.xilinx.com Embedded System Tools Guide (EDK 6.2i)

1-800-255-7778 UG111 (v1.4) January 30, 2004

Chapter 4: Create/Import Peripheral Wizard

Documentation files

Documentation files are selected by browsing to the file. These files can be in any of the

common formats, e.g. PDF (.pdf) or TEXT (.txt).

Finishing Peripheral Import

Once all the required data has been collected from the user, this tool does the following:

x Copy over the user HDL, netlist and documentation files into the XPS project into a

directory structure determined by the PSF specification. If the peripheral was being

outputted into a XPS project, the core is outputted in a directory named pcores

located in the project directory. If the target was a XPS repository directory, then the

core is outputted under MyProcessorIPLib/pcores under the repository

directory.

x Generate the interface files required by the various tools in the EDK. These include the

MPD, PAO, BBD files.

If you already have any files in the target area, they would be backed up unless you

instruct otherwise.

Note that your source HDL, netlist and documentation files are getting copied over. If you

make in any changes you may have to run this tool again. Additionally, the output of this

tool is highly dependent on the port/parameter interface and the HDL analyze order. If

any of these change you may want to re-run this tool.

Figure 4-22: Select Documentation Files