Specifications

Embedded System Tools Guide (EDK 6.2i) www.xilinx.com 95
UG111 (v1.4) January 30, 2004 1-800-255-7778
Importing an Existing Peripheral
R
If you position the cursor on one of the attributes in the left column of the Attributes Table,
a short description of the attribute will appear. This description will usually contain the
MPD keyword for this parameter.
Netlist files
Your peripheral can be HDL with fixed netlists instantiated as black-boxes. In this panel
you locate the netlist files associated with your peripheral. This selection is done by
browsing to the directory containing the file.
This tool does not allow you to associate different netlist files with different parameter
values for your peripheral. Also, you must have at least one HDL file associated with your
core. This could be the HDL file that just instantiates a black-box netlist.These files can be
in any of the common formats, e.g. NGC/NGO (.ngc and.ngo) or EDIF (.edn or .edf).
Figure 4-20: Setting Attributes on Parameters
Figure 4-21: Select Netlist Files