Specifications

92 www.xilinx.com Embedded System Tools Guide (EDK 6.2i)
1-800-255-7778 UG111 (v1.4) January 30, 2004
Chapter 4: Create/Import Peripheral Wizard
R
Identifying Bus Interface Ports and Parameters
A peripheral that implements a particular bus interface needs to the have the ports
required by that interface. The ports do not have to have specific names, but it is best if the
port are named exactly as specified in the specification of that interface. When the ports are
named as the convention requires, this tool will correctly identify the bus interface ports.
If this tool is unable to identify all the ports, the user will have to manually identify the bus
interface ports. All bus interface ports must be identified before this tool will actually
import any peripheral.
Similarly, some of the bus interfaces require associated parameters. Again, these are
automatically identified if the parameters are named according to the interface convention.
Otherwise the user will have to identify the required parameters.
For identifying the bus interface ports, the user is presented with a two column table. The
left column lists the required bus interface ports. The cells to the right of each bus interface
Figure 4-16: Identify Bus Interface Ports
Figure 4-17: Identify Bus Interface Parameters