Specifications

90 www.xilinx.com Embedded System Tools Guide (EDK 6.2i)

1-800-255-7778 UG111 (v1.4) January 30, 2004

Chapter 4: Create/Import Peripheral Wizard

If you had chosen to select files by using the file browser, you can use the Move File Up

and

Move File Down buttons to change the compile order of the files.

Typically a selected file is assumed to be compiled into the logical library containing the

current peripheral. This was explained in the “Identifying Module and Version” section.

If you need to include files from some other peripheral, then that peripheral must be

available in the repositories known by XPS, or has been previously added to the current

project.

When you click on the

Select Library button, the libraries available in the repositories

known to the current XPS project are displayed in a Library Selection Panel. When you

select a library, the files available in the library are displayed. All files in the selected library

are selected by default, but you can deselect the files that you don’t care about by

unckecking the check box next to the file.

Figure 4-13: Indicating HDL Analysis Information by Browsing to Files

Figure 4-14: Selecting Files from Other Libraries