Specifications

Embedded System Tools Guide (EDK 6.2i) www.xilinx.com 197
UG111 (v1.4) January 30, 2004 1-800-255-7778
MicroBlaze MDM Target
R
Starting GDB server for target (id = 0) at TCP port no 1234
XMD% dow dhry2.elf
XMD% bps 0xffff09d0
XMD% traceopen trace.out
XMD% tracestart
XMD% con
Processor started. Type "stop" to stop processor
RUNNING>
XMD% tracestop
XMD% traceclose
XMD% stats trace.out
Program Stats ::
Instructions : 197491
Loads : 20296
Stores : 19273
Multiplications : 3124
Branches : 27262
Branches taken : 20985
Returns : 2070
MicroBlaze MDM Target
xmd can connect through JTAG to one or more MicroBlaze processors using the opb_mdm
(MicroBlaze Debug Module) peripheral. Use the command “mbconnect mdm“ in
order to connect to the mdm target and start the remote GDB server. The MDM target