Specifications

136 www.xilinx.com Embedded System Tools Guide (EDK 6.2i)
1-800-255-7778 UG111 (v1.4) January 30, 2004
Chapter 8: Platform Specification Utility
R
errors when your peripheral requires information on the platform that is generated. The
following table lists the reserved generic names:
Reserved Parameters
C_BUS_CONFIG
The C_BUS_CONFIG parameter defines the bus configuration of the MicroBlaze
processor. This parameter is automatically populated by Platform Generator.
Figure 8-1: Automatically Expanded Reserved Generics
Parameter Description
C_BUS_CONFIG Bus Configuration of MicroBlaze
C_FAMILY FPGA Device Family
C_INSTANCE Instance name of component
C_KIND_OF_EDGE Vector of edge sensitive (rising/falling) of interrupt
signals
C_KIND_OF_LVL Vector of level sensitive (high/low) of interrupt
signals
C_KIND_OF_INTR Vector of interrupt signal sensitivity (edge/level)
C_NUM_INTR_INPUTS Number of interrupt signals
C_<BI>OPB_NUM_MASTERS Number of OPB masters
C_<BI>OPB_NUM_SLAVES Number of OPB slaves
C_<BI>DCR_AWIDTH DCR Address width
C_<BI>DCR_DWIDTH DCR Data width
C_<BI>DCR_NUM_SLAVES Number of DCR slaves
C_<BI>LMB_AWIDTH LMB Address width
C_<BI>LMB_DWIDTH LMB Data width
C_<BI>LMB_NUM_SLAVES Number of LMB slaves
C_<BI>OPB_AWIDTH OPB Address width
C_<BI>OPB_DWIDTH OPB Data width
C_<BI>OPB_NUM_MASTERS Number of OPB masters
C_<BI>OPB_NUM_SLAVES Number of OPB slaves
C_<BI>PLB_AWIDTH PLB Address width
C_<BI>PLB_DWIDTH PLB Data width
C_<BI>PLB_MID_WIDTH PLB master ID width
C_<BI>PLB_NUM_MASTERS Number of PLB masters
C_<BI>PLB_NUM_SLAVES Number of PLB slaves