Specifications

CHAPTER 4: SYNTHESIS
ANALYZING SYNTHESIS RESULTS WITH THE TECHNOLOGY MAP VIEWER
ALTERA CORPORATION INTRODUCTION TO QUARTUS II ■ 85
Figure 9. Technology Map Viewer Window
In the Technology Map Viewer, you can select one or more items in the
hierarchy list to highlight in the schematic view, and vice versa. The
Technology Map Viewer allows you to navigate the view in much the same
way as the RTL Viewer; see “Analyzing Synthesis Results with the RTL
Viewer” on page 80. The tooltips in the Technology Map Viewer display
equation information as well as node and source information.
After performing Timing Analysis or performing a full compilation that
includes Timing Analysis, you can also use the Technology Map Viewer to
view the nodes that make up the timing path, including information about
total delay and individual node delay. See “Using the Technology Map
Viewer” on page 156 in Chapter 8, “Timing Analysis.”
f
For Information About Refer To
Using the Quartus II Technology Map
Viewer
“Analyzing Designs with the Quartus II RTL
Viewer and Technology Map Viewer” in the
Quartus II Handbook, vol. 1, on the Altera
web site
“Overview: Viewing RTL Schematics” in
Quartus II Help