Specifications

CHAPTER 12: DEBUGGING
USING THE SIGNALTAP II LOGIC ANALYZER
ALTERA CORPORATION INTRODUCTION TO QUARTUS II ■ 199
5. If necessary, specify Advanced Trigger conditions.
6. Compile the design.
7. Program the device.
8. Acquire and analyze signal data in the Quartus II software or using an
external logic analyzer or oscilloscope.
Figure 3 shows the SignalTap II Logic Analyzer.
Figure 3. The SignalTap II Logic Analyzer
Instance
Manager
Setup View Signal Configuration
Panel
JTAG Chain
Configuration
Incremental Compile
option