Specifications

CHAPTER 6: BLOCK-BASED DESIGN
USING LOGICLOCK WITH EDA TOOLS
ALTERA CORPORATION INTRODUCTION TO QUARTUS II ■ 125
to place each netlist file or module within a netlist file into a separate
LogicLock region in a top-level design. Once in the Quartus II software, you
can make changes, optimize, and resynthesize specific modules in the
design by using the EDA tool to update the corresponding part of the design,
without affecting the other modules in the design.
The Mentor Graphics LeonardoSpectrum, Synplicity Synplify, Synopsys
FPGA Compiler II, and Mentor Graphics Precision RTL Synthesis software
provide customized features for using these tools in the block-based
LogicLock design flow.
f
For Information About Refer To
Using LogicLock with EDA synthesis
tools
“Synplicity Synplify and Synplify Pro
Support,” in the Quartus II Handbook, vol.
1, on the Altera web site
“Mentor Graphics LeonardoSpectrum
Support,” in the Quartus II Handbook, vol.
1, on the Altera web site
“Mentor Graphics Precision RTL Synthesis
Support,” in the Quartus II Handbook, vol.
1, on the Altera web site