Specifications

CHAPTER 5: PLACE & ROUTE
ANALYZING FITTING RESULTS
ALTERA CORPORATION INTRODUCTION TO QUARTUS II ■ 93
Analyzing Fitting Results
The Quartus II software offers several tools to help you analyze the results
of compilation and fitting. The Messages window and Report window
provide fitting results information. The Timing Closure floorplan and Chip
Editor allow you to view fitting results and make adjustments, if necessary.
In addition, the Design Assistant helps you check the reliability of a design
based on a set of design rules.
Using the Messages Window to View
Fitting Results
The Processing tab of the Messages window and the Messages section of the
Report window or Report File display the messages generated from the most
recent compilation or simulation. Figure 3 shows the Messages window.
f
For Information About Refer To
Using Quartus II incremental
compilation
“Quartus II Incremental Compilation,” in the
Quartus II Handbook, vol. 1, on the Altera
web site
“Overview: Using Incremental Compilation”
in Quartus II Help