Installation manual

Série 32 Mlift Vector - Prog.Vectorielle Installation manual Chapter I - page 37
CONCERNING THE ILLUSTRATIONS (1/2)
Each connection that you will have to carry out is accompanied by an explication and
an illustration. The illustrations try to summarise in one page all the important elements
which will be necessary for you to carry out the corresponding function; i.e.:
• The PARAMETERS which you need to check or adjust,
• The CONNECTIONS themselves,
• The corresponding VARIABLES or INPUTS/OUTPUTS,
• The CONSEQUENCES of any possible ANOMALY connected with the function in
question.
In order to achieve this goal (or at least to try to) this manual uses the following symbols:
RAM
PAR
ADR/DON
MODIF
ECRIT
OU
View of the parameter/diagnostic tool when you should check or
modify a parameter's value. Note that the push buttons are
shown in this case. The figure also specifies the position of the
sliding switches on the BG17 board.
RAM
PAR
ADR/DON
MODIF
View of the parameter/diagnostic tool when you should check the
state or value of a variable. Note that the push buttons are not
shown in this case. The figure also specifies the position of the
sliding switches on the BG17 board.
XXXXXX
Add.
YY
Seg.
Z
Name, address and possible segment number, for the variable or
parameter shown in one of the 2 preceding figures.
You should
check
the value or state of the parameter indicated,
and of course changes the parameter if it does not correspond to
the value or state indicated.
You should
adjust
the value of the parameter indicated. The unit
used (second, 1/10 second, millimetre, etc...) and the base
(decimal or hexadecimal) are displayed.
Note: You will find all useful information about the bases and the
conversions between bases in the chapter dedicated to
the parameters.
☺
Don't worry, be happy!
The parameter shown is at the
right
value, or the variable shown
reflects a normal operation of the function in question.

Now worry!
The parameter shown is the wrong value, or the variable shown
reflects a breakdown of the function in question.