Installation manual

Série 32 Mlift Vector - Prog.Vectorielle Installation manual Chapter I - page 27
T
O ACCESS THE PARAMETERS AND THE INPUT
-
OUTPUT INFORMATION
Each time you press
1
the value shown will increase by
1
.
Each time you press
10
the value shown will increase by
10
.
Each time you press 100 the value shown will increase by 100.
Each time you press 1000 the value shown will increase by 1000.
C
HOOSING THE LANGUAGE
Power-up the equipment, the display shows:
VEC-Vxx xx/xx/xx
MODIF. CLEAR VALID.
1000 100 10 1
THEN
000 V0 0,150m/s
MODIF. CLEAR VALID.
1000 100 10 1
The parameter/diagnostic communication device is preset to the language of the destination
country.
There are four options which appear at address
027
as follows:
FRANCE, ENGLISH, DEUTSCH, ESPAGNOL.
Press twice button 10,
then 7 times button 1,
for address 027
Press both MODIF buttons
at the same time
Press button 1 and choose the
required language.
027 Country FRANCE
2 x 7 x
MODIF. CLEAR VALID.
1000 100 10 1
MDF Country FRANCE
MODIF. CLEAR VALID.
1000 100 10 1
MDF
Country ENGLISH
MODIF. CLEAR VALID.
1000 100 10 1
Register the required language by pressing both VALID buttons at the same time
027 Country ENGLISH
MODIF. CLEAR VALID.
1000 100 10 1
The language in our example is English