Installation manual

Série 32 Mlift Vector - Prog.Vectorielle Installation manual Chapter VII - page 76
PARAMETER DEFINITIONS
• Par Address
C8
:
Slow speed distance chosen up to the temperature programmed
into C0, best displayed in hexadecimal.
At this address, in the context of THE SLOW SPEED DISTANCE VARIATION OF THE
OIL TEMPERATURE IN THE HYDRAULIC UNIT function, we program the slow speed
distance (in %) chosen up to the temperature programmed into C0.
• Par Address
C9
:
Slow speed distance chosen up to the temperature programmed
into C1, best displayed in hexadecimal.
We program the slow speed distance (in %) chosen up to the temperature programmed
into C1.
• Par Address
CA
:
Slow speed distance chosen up to the temperature programmed
into C2, best displayed in hexadecimal.
We program the slow speed distance (in %) chosen up to the temperature programmed
into C2.
• Par Address
CB
:
Slow speed distance chosen up to the temperature programmed
into C3, best displayed in hexadecimal.
We program the slow speed distance (in %) chosen up to the temperature programmed
into C3.
• Par Address
CC:
Slow speed distance chosen up to the temperature programmed
into C4, best displayed in hexadecimal.
We program the slow speed distance (in %) chosen up to the temperature programmed
into C4.
• Par Address
CD:
Slow speed distance chosen up to the temperature programmed
into C5, best displayed in hexadecimal.
We program the slow speed distance (in %) chosen up to the temperature programmed
into C5.
• Par Address
CE
:
Slow speed distance chosen up to the temperature programmed
into C6, best displayed in hexadecimal.
We program the slow speed distance (in %) chosen up to the temperature programmed
into C6.
• Par Address
CF
:
Slow speed distance chosen up to the temperature programmed
into C7, best displayed in hexadecimal.
We program the slow speed distance (in %) chosen up to the temperature programmed
into C7.