Installation manual

ManualsBrandsVector ManualsBattery ChargerVEC12B

211

212

213

214

215

216

217

218

219

220

Série 32 Mlift Vector - Prog.Vectorielle Installation manual Chapter VII - page 70

PARAMETER DEFINITIONS

Segment

OUAVAP2N0

(Open Before Stop of Door 2 at

Level 0).

We program segment 3 to " 1 " when we want to carry out an opening before stop of door

2 at level 0.

We program segment 3 to " 0 " in the reverse case.

Segment

STPOU0

(Parking Door 2 Open at Level 0).

We program segment 2 to " 1 " when we want to park the car with door 2 open at level 0.

We program segment 2 to " 0 " in the reverse case.

Segment

SER2IN0

(Service 2 Not Allowed at Level 0).

We program segment 1 to " 1 " when the opening of door 2 at level 0 is not allowed.

We program segment 1 to " 0 " when we allow the opening of door 2 at level 0.

Segment

OUNSIM0

(Non Simultaneous Opening at Level 0).

We program segment 0 to " 1 " when the simultaneous opening of doors 1 and 2 at level 0

is not allowed (locking effect).

We program segment 0 to " 0 " when we allow the simultaneous opening of doors 1 and 2

at level 0.

This function can only be used in the double service selective.

• Par Address

: best displayed in segment mode.

At this address, we define the functioning of door 2 for level 1.

• Par Address

..... same for level 02.

• Par Address

..... same for level 03.

• Par Address

..... same for level 04.

• Par Address

..... same for level 05.

• Par Address

..... same for level 06.

• Par Address

..... same for level 07.

• Par Address

..... same for level 08.

• Par Address

..... same for level 09.

• Par Address

..... same for level 10.

• Par Address

..... same for level 11.

• Par Address

..... same for level 12.

• Par Address

..... same for level 13.

• Par Address

..... same for level 14.

• Par Address

..... same for level 15.