Installation manual

Série 32 Mlift Vector - Prog.Vectorielle Installation manual Chapter VII - page 62
PARAMETER DEFINITIONS
• Par Address
48
: best displayed in segment mode.
At this address, we define the operation of door 1 for level 0.
Segment
7
:
RCAME
(Retiring Ramp Delay).
If we program segment 7 and the " single car door " segment 4 to 1, there is a delay of 1.5
seconds when arriving at the level before the retiring ramp is de-energised.
This limits the risk of getting fingers trapped in the car door which will barely start its
opening movement, insofar as we do not know how to open swing door before 1.5
seconds have elapsed.
If we program segment 7 to " 1 " in the case of totally automatic doors the retiring ramp is
de-energised 1 second before initiating the door opening on arriving at a level.
This can be useful in the case of the totally automatic doors interlocked with a retiring
ramp. Indeed, problems of things getting stuck can occur if the doors are opened at the
same time as the de-energising of the retiring ramp.
Segment
6
: Not used
Segment
5
: Not used
Segment
4
: (Car Door 1 at Level 0).
We program segment 4 to " 1 " when a car is fitted with an automatic door commanded by
the Series 32 relays, the landing doors being of the swinging type.
We program segment 4 to " 0 " when a flush shaft, an automatic car door driven by one
retiring ramp or an automatic car and hall door is used.
Segment
3
:
OUAVAP1N0
(Opening Door 1 Before Stop at
Level 0).
We program segment 3 to " 1 " when we want the Series 32 to Open Door 1 Before
Stopping at Level 0.
We program segment 3 to " 0 " in the reverse case.
Segment
2
:
STP1OUN0
(Parking with Door 1 Open at level 0).
We program segment 2 to " 1 " when we want the car to park with door 1 open at level 0.
We program segment 2 to " 0 " in the reverse case.
Segment
1
:
SER1INO
(Service 1 not allowed at Level 0).
We program segment 1 to " 1 " when we wish to prevent door 1 opening at level 0.
We program segment 1 to " 0 " when we authorise the opening of door 1 at level 0.