Installation manual

Série 32 Mlift Vector - Prog.Vectorielle Installation manual Chapter VII - page 56
PARAMETER DEFINITIONS
• Par Address
25
:
NUMARO
(Cabinet Number) best displayed in decimal.
The Series 32 has an " identity card ", formatted in the following way: YEAR /
MONTH / POSITION NUMBER.
E.G.: a cabinet with the number 93 / 09 / 57 is a cabinet made in the year 1993, the month
of September and the 57th produced that month.
At address 25, we program the position number.
• Par Address
26
:
NUMAR1
(Cabinet Number) best displayed in decimal.
At address 26, we program the production month.
• Par Address
27
:
NUMAR2
(Cabinet Number) best displayed in decimal.
At address 27, we program the production year.
• Par Address
28
:
REPT00
(REPeater at level 00) best displayed in hexadecimal.
At this address, we program the selection code of the character (among those contained in
the REF displays are ID30, ID50, IDFL30, IDFL50) which we want to display at level 0.
See the table for the conversion between the different characters it is possible to display.
• Par Address
29
:
Same for level 01.
• Par Address
2a
:
Same for level 02.
• Par Address
2b
:
Same for level 03.
• Par Address
2c
:
Same for level 04.
• Par Address
2d
:
Same for level 05.
• Par Address
2e
:
Same for level 06.
• Par Address
2f
:
Same for level 07.
• Par Address
30
:
Same for level 08.
• Par Address
31
:
Same for level 09.
• Par Address
32
:
Same for level 10.
• Par Address
33
:
Same for level 11.
• Par Address
34
:
Same for level 12.
• Par Address
35
:
Same for level 13.
• Par Address
36
:
Same for level 14.
• Par Address
37
:
Same for level 15.