System information

Installing Hardware Options
MicroVAX 3100 Models 88/98 User Information
3-19
Installing the KZDDA
The KZDDA external SCSI option is installed in the bottom I/O slot. To install the
KZDDA option, refer to Figure 3-13 and follow these instructions:
1. Turn off the system, unplug the power cord and remove the cover.
2. Insert the module into the bottom slot of the I/O receiver, pressing it firmly into
place to seat the connection.
MLO-013627
1
2
Figure 3-13 Installing the KZDDA External SCSI Option
3. Insert the screw through the option and into the I/O shelf as shown.
4. Attach external SCSI cable.
5. Close the cover, connect the power cord and plug it into the wall outlet.