System information

Getting Started
MicroVAX 3100 Models 88/98 User Information
2-29
Checking the Power-Up Test Results
The power-up test can take several minutes to complete, depending on the number of
installed options you have and on which default settings you use:
A. If the power-up test results on the screen are similar to the results shown below, the
system has passed the power-up test.
B. If the power-up test results on the screen are not similar to the results shown below,
the system has not passed the power-up test. Go to sub-step 1.
KA58-A or KA59-A V1.0, VMB 2.16
Performing normal system tests.
74..73..72..71..70..69..68..67..66..65..64..63..62..61..60..59..
58..57..56..55..54..53..52..51..50..49..48..47..46..45..44..43..
42..41..40..39..38..37..36..35..34..33..32..31..30..29..28..27..
26..25..24..23..22..21..20..19..18..17..16..15..14..13..12..11..
10..09..08..07..06..05..04..03..
Tests completed.
>>>
Central Processing Unit (CPU) name, Firmware version number, and Virtual Memory
Boot (VMB) version number
Read-Only Memory (ROM) based diagnostics countdown
Status message
Console prompt
1. Write down the error messages and the error summaries. the following example shows
an error message and an error summary.
2. Turn the system OFF and remove AC power cord..
3. Make sure that all the connections you made in step 3, step 4, step 5, and step 6 are
correct.
4. Attach the AC power cord and turn the system ON.
5. If an error report is still displayed, see the Troubleshooting chapter in this manual.